Traction Control Switch: Service and Repair

Electronic Traction Control Switch Replacement

Removal Procedure




1. Remove right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side Front Floor Console Side Trim Panel Replacement - Right Side.
2. Carefully release the retaining tabs and remove the traction control switch from the center console.
3. Disconnect the electrical connector.

Installation Procedure

1. Connect the electrical connector to the traction control switch.




2. Install the traction control switch to the center console. Ensure that the retaining ring tabs are fully engaged.
3. Install the right console accessory trim plate. Refer to Front Floor Console Side Trim Panel Replacement - Right Side Front Floor Console Side Trim Panel Replacement - Right Side.