Camshaft Gear/Sprocket

Install the camshaft actuator retainer (1) EN-48953 - Camshaft
Actuator Locking Tool.

Install the camshaft actuator retainer bolts and tighten to 10 Nm (89 lb in).

Tighten the NEW camshaft actuator bolt to 30 Nm (22 lb ft) plus an additional 100 degrees using the J 45059 .


Refer to Camshaft Position Intake Actuator Replacement.
Camshaft Position Intake Actuator Replacement

Refer to Camshaft Position Exhaust Actuator Replacement
Camshaft Position Exhaust Actuator Replacement