Transmission Brace Replacement

Transmission Brace Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.




2. Remove the transaxle brace bolts (1, 3).
3. Remove the transaxle brace (2).

Installation Procedure




1. Install the transaxle brace (2).

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the transaxle brace bolt (1) and tighten to 50 Nm (37 lb ft).
3. Install the transaxle brace bolt (3) and tighten to 100 Nm (74 lb ft).
4. Lower the vehicle.