Convertible

Engine Mount Replacement (Convertible)

Removal Procedure




1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (NU6) Air Cleaner Assembly Replacement (NU6)Air Cleaner Assembly Replacement (NT7) Air Cleaner Assembly Replacement (NT7).
2. Place a block of wood on a adjustable floor jack, and place the jack under the oil pan in order to support the engine.
3. Remove the engine mount to engine mount bracket bolts.




4. Remove the engine mount bolts.
5. Remove the engine mount.

Installation Procedure




1. Place the engine mount into position on the engine compartment side rail.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the engine mount bolts.

Tighten the bolts to 50 Nm (37 lb ft).




3. Install the engine mount to engine mount bracket bolts.

Tighten the bolts to 50 Nm (37 lb ft).

4. Remove the floor jack and block of wood from under the oil pan.
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (NU6) Air Cleaner Assembly Replacement (NU6)Air Cleaner Assembly Replacement (NT7) Air Cleaner Assembly Replacement (NT7).