Operation CHARM: Car repair manuals for everyone.

C1298




DTC C1298

Circuit Description

If a malfunction in the speed sensor signal circuit or the yaw rate sensor circuit occurs, the 4WD control module will output this DTC.

DTC Descriptor

This diagnostic procedure supports the following DTC:

DTC C1298 Linear Solenoid Circuit

Conditions for Running the DTC

This DTC shall run when the ignition is On.

Conditions for Setting the DTC

For 1 second or more, with the current of 0.8 A or more, an open or short in the linear solenoid circuit occurs.

Action Taken When the DTC Sets

The 4WD control module will prohibit operations by the fail safe function.

Conditions for Clearing the DTC

The DTC will clear when conditions for setting the DTC have been repaired.