Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2010 >> Vibe AWD L4-2.4L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Alarm Module >> Service and Repair >> Theft Deterrent Exciter Module Replacement

Theft Deterrent Exciter Module Replacement




Theft Deterrent Exciter Module Replacement

Removal Procedure

1. Remove the instrument panel upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement (Instrument Panel Upper Trim Pad Replacement).
2. Remove the lower instrument panel. Refer to Instrument Panel Lower Trim Panel Replacement (Instrument Panel Lower Trim Panel Replacement).




3. Remove the HVAC Module (2) to gain access to the Theft Deterrent Exciter Module (1). Refer to Air Conditioning and Heater Module Assembly Replacement (Air Conditioning and Heater Module Assembly Replacement).




4. Remove the Theft Deterrent Exciter Module (4).

* Disconnect the module connector (1).
* Disconnect the wire harness fastener (2).
* Remove the bolt (3).

Installation Procedure




1. Install the Theft Deterrent Exciter Module (4).

* Install the bolt (3).
* Connect the wire harness fastener (2).
* Connect the module connector (1).




2. Install the HVAC Module (2). Refer to Air Conditioning and Heater Module Assembly Replacement (Air Conditioning and Heater Module Assembly Replacement).
3. Install the lower instrument panel. Refer to Instrument Panel Lower Trim Panel Replacement (Instrument Panel Lower Trim Panel Replacement).
4. Install the instrument panel upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement (Instrument Panel Upper Trim Pad Replacement).
5. Perform the Key Learn Procedure. Refer to Immobilizer System Component Programming (Programming and Relearning).

pro multis · About Operation CHARM