Cowl Moulding / Trim: Service and Repair

Air Inlet Grille Panel Replacement

Removal Procedure




1. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (Windshield Wiper Arm Replacement).
2. Remove the rear hood seal from the air inlet grille panel, if necessary. Refer to Hood Rear Seal Replacement (Service and Repair).
3. Remove the push-in retainer (1).
4. Disengage the twelve retainers and guide and remove the right side air inlet grille panel.




5. Remove the push-in retainer (1).
6. Disengage the seven retainers and remove the left side air inlet grille panel.

Installation Procedure




1. Engage the seven retainers and install the left side air inlet grille panel.
2. Install the push-in retainer (1).




3. Engage the twelve retainers and guide and install the right side air inlet grille panel.
4. Install the push-in retainer (1).
5. Install the rear hood seal from the air inlet grille panel, if removed. Refer to Hood Rear Seal Replacement (Service and Repair).
6. Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (Windshield Wiper Arm Replacement).