Instrument Panel Accessory Trim Plate Replacement - Left Side

Instrument Panel Accessory Trim Plate Replacement - Left Side

Removal Procedure




1. Disengage the five retainers.
2. Disconnect the power mirror switch electrical connector.
3. Remove the left accessory trim plate.
4. Remove the power mirror switch, if necessary. Refer to Power Mirror Switch Replacement (Service and Repair).

Installation Procedure




1. Install the power mirror switch, if removed. Refer to Power Mirror Switch Replacement (Service and Repair).
2. Install the left accessory trim plate.
3. Connect the power mirror switch electrical connector.
4. Engage the five retainers.