37. Oil Pump Assemble

Oil Pump Assemble




1. Coat the drive rotor and driven rotor with engine oil.
2. Place the drive and driven rotors into the oil pump with the marks (1) facing the pump cover side.





Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the oil pump cover with the 5 bolts (1-5).

Tighten to 8.8 Nm (78 lb in).

4. Coat the relief valve with engine oil.




5. Insert the relief valve (3) and spring (2) into the pump body hole.
6. Using a 27 mm socket wrench, install the plug (1).

Tighten to 49 Nm (36 lb ft).




7. Install a new gasket and the oil strainer with the 2 nuts (1, 2).

Tighten to 8.8 Nm (78 lb in).