37. Control Valve Body and Wiring Harness Removal

Control Valve Body and Wiring Harness Removal




1. Disconnect the solenoid connectors (1-6).
2. Remove the bolt (7) and lock plate and remove the ATF temperature sensor.




3. Remove the bolts (3) and remove the manual shaft detent spring plate (2) and detent spring (1).




4. Remove the bolts (1) and the valve body assembly from the transaxle case.




5. Remove the bolt and the transmission wire harness (1) from the transmission case.




6. Remove the O-ring (1) from the transmission wire.