56. Transmission Fluid Pan Installation

Transmission Fluid Pan Installation




1. Coat a new O-ring (1) with ATF WS, and install it to the oil strainer.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the oil strainer to the valve body with the bolts (1) and tighten to 11 Nm (97 lb in).




3. Install the magnets (1) to the oil pan.
4. Apply sealant Three Bond 1281 or equivalent to the bolts.




5. Install a new oil pan gasket and the oil pan to the transaxle case with the bolts (1) and tighten to 8 Nm (71 lb in).
6. Install a new gasket to the drain plug.
7. Install the drain plug and tighten to 49 Nm (36 lb ft).