31. 2-4 Clutch Piston Installation

2-4 Clutch Piston Installation

Special Tools

J 41221 Oil Seal Installer





Note: Do not damage the O-rings.

1. Coat the new O-rings (1, 2) with ATF WS and install them to the 2-4 clutch piston.




2. Install the 2-4 clutch piston.
3. Coat the piston with ATF WS and install it to the transmission case cover.





Note:
* Stop pressing when the spring seat is 1-2 mm (0.039-0.078 in) from the snap ring groove to prevent the spring seat from being deformed.
* Do not expand the snap ring excessively.

4. Using a press and J 41221 , install the 2-4 clutch spring and snap ring to the transmission case cover.