18. 2nd Clutch Housing Disassemble

2nd Clutch Housing Disassemble

Special Tools

J 41107 Axle Seal Installer Kit




1. Using a screwdriver, remove the snap ring (1).




2. Remove the 2nd clutch housing assembly (1) from the transaxle case.




3. Using a press, J-41107, and four equal length blocks (1), remove the 2nd clutch piston return spring.




4. Remove the 2nd clutch piston return spring sub-assembly (1).




5. Hold the 2nd clutch housing and apply compressed air to the 2nd clutch hole to remove the 2nd clutch piston.




6. Remove the O-rings (1, 2) from the 2nd clutch piston.