Front Seat Adjuster Track Finish Cover Replacement (Outboard)

Front Seat Adjuster Track Finish Cover Replacement (Outboard)

Removal Procedure




1. Disable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).
2. Remove the recliner handle (1) from the front seat outboard adjuster by disengaging the retaining tab (2).




3. If equipped with seat adjuster knob, remove the following components:

1. Using a flat bladed tool, remove the seat adjuster knob cap.
2. Remove the 2 screws (1) and the knob (2)




4. Remove the screw (2) from the outer track cover (5).
5. Disengage the claw (2).
6. Disengage the clip (4).
7. Disengage the guide (3) and remove the outer track cover (5).

Installation Procedure




1. Engage the guide (3) and install the outer track cover (5).
2. Engage the clip (4).
3. Engage the claw (2).
4. Install the screw (2) to the outer track cover (5).




5. If equipped with seat adjuster knob, Install the following components:

1. Install the knob (2), securing with 2 screws (1)
2. Install the seat adjuster knob cap.




6. Install the recliner handle (1) to the front seat outboard adjuster by engaging the retaining tab (2).
7. Enable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).