Blower Motor Relay: Service and Repair

Blower Motor Relay Replacement

Removal Procedure

1. Remove the instrument panel (IP) accessory left trim panel. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side (Instrument Panel Accessory Trim Plate Replacement - Left Side).
2. Remove the heater relay from the IP fuse block.

Installation Procedure

1. Install the heater relay to the IP fuse block.
2. Install the instrument panel (IP) accessory left trim panel. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side (Instrument Panel Accessory Trim Plate Replacement - Left Side).