Dome Lamp Replacement (Center and Rear)

Dome Lamp Replacement (Center and Rear)

Removal Procedure




1. Using a taped flat-bladed tool, disengage the four clips and remove the lens cover (1).




2. Disengage the clip (2) and guide (1) in the order shown in the illustration, and remove the dome lamp cover.




3. Using a taped flat-bladed tool, disengage the two clips (2) as shown in the illustration.
4. Disengage the two clips (1).




5. Using a taped flat-bladed tool, disengage the four clips and remove the dome lamp assembly.

Installation Procedure




1. Engage the guide (1) and clip (2) in the order shown in the illustration, and install the dome lamp cover.




2. Engage the four clips and install the lens cover.




3. Engage the four clips and install the dome lamp switch base to the center dome lamp assembly.




4. Engage the four clips and install the dome lamp assembly.