Removal and Replacement

Front Fog Lamp Replacement (With GT)

Removal Procedure




1. Remove the front fascia. Refer to Front Bumper Fascia Replacement (Without GT) (Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (With GT) (Front Bumper Fascia Replacement).
2. Disengage the two guides (2).
3. Disengage the aiming screw (1).
4. Remove the fog lamp assembly from the vehicle.




5. Remove the fog lamp bulb from the fog lamp, if necessary by turning counter clockwise.

Installation Procedure




1. Install the fog lamp bulb to the fog lamp, turning clockwise, if required.




2. Engage the aiming screw (1).
3. Engage the two guides (2).
4. Install the front fascia. Refer to Front Bumper Fascia Replacement (Without GT) (Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (With GT) (Front Bumper Fascia Replacement).
5. Check and adjust the fog lamp aim as necessary. Refer to Fog Lamp Aiming (Procedures).