60000 MI or 96000 KM

Inspect/Adjust
    Valve Clearance
      Inspect for tappet noise and engine vibration. Adjust valve clearance to factory specifications if necessary (or every 48 months, whichever occurs first).
Inspect
    Restraints and Safety Systems
      Inspect restraint system components. Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Have any torn or frayed safety belts replaced.
    Fuel Tank
      Inspect fuel tank, cap, cap gasket, and lines for damage or leaks (or every 24 months, whichever occurs first). Replace parts as needed.
    Drive Belt
      Inspect engine accessory drive belts (or every 48 months, whichever occurs first). Visually inspect belt for fraying, excessive cracks, or obvious damage. Replace belt if necessary.
Replace
    Oil Filter, Engine
      Change engine oil filter (or every 3 months, whichever occurs first).
    Engine Oil
      Change engine oil (or every 3 months, whichever occurs first).
    Cabin Air Filter / Purifier
      Replace passenger compartment air filter.
    Air Filter Element
      Replace engine air cleaner filter (or every 24 months, whichever occurs first).
Rotate
    Tires
      A good time to check your brakes is during tire rotation.