Fuel Level Sensor: Service and Repair

Fuel Sender Assembly Replacement

Removal Procedure

1. Remove the fuel pump. Refer to Fuel Pump and Fuel Filter Assembly Replacement (Fuel Pump and Fuel Filter Assembly Replacement).





Note: Make sure that the fuel sender gage arm does not bend.

2. Release the lock (2) and slide the fuel sender gage assembly to remove it.

Installation Procedure

1. Install the left fuel sender gage assembly for AWD.

Note: Do not damage the wire harness.

2. Install the fuel sender gage assembly by sliding it downward.

Note: Make sure that the fuel sender gage arm does not bend.

3. Connect the connector of the fuel sender gage assembly.




4. Install the fuel sender gage assembly by sliding it downward for FWD.

Note: Make sure that the fuel sender gage arm does not bend.

5. Connect the connector (1) of the fuel sender gage assembly.
6. Install the fuel pump. Refer to Fuel Sender Assembly Replacement .