Circuit Testing

Circuit Testing

The Circuit Testing section contains the following diagnostic testing information. Using this information along with the diagnostic procedures will identify the cause of the electrical malfunction.

* Using Connector Test Adapters (Using Connector Test Adapters)
* Probing Electrical Connectors (Probing Electrical Connectors)
* Troubleshooting with a Digital Multimeter (Troubleshooting with a Digital Multimeter)
* Troubleshooting with a Test Lamp (Troubleshooting with a Test Lamp)
* Using Fused Jumper Wires (Using Fused Jumper Wires)
* Measuring Voltage (Measuring Voltage)
* Measuring Voltage Drop (Measuring Voltage Drop)
* Measuring Frequency (Measuring Frequency)
* Testing for Continuity (Testing for Continuity)
* Testing for Short to Ground (Testing for Short to Ground)
* Testing for a Short to Voltage (Testing for a Short to Voltage)