1. Park/Neutral Position Switch Adjustment

Park/Neutral Position Switch Adjustment




1. Adjust the park/neutral position switch assembly.
2. Loosen the bolts (1, 2) of the park/neutral position switch and move the shift lever to N.




3. Align the groove (1) with the neutral basic line (2).

Caution: Refer to Fastener Caution (Fastener Caution).

4. Hold the switch in position and tighten the bolts.

Tighten the bolts to 5 Nm (44 lb in).

5. After the adjustment, perform the switch operation check.