33. 1-2-3-4-Reverse Clutch Piston Installation

1-2-3-4-Reverse Clutch Piston Installation

Special Tools

DT-47693-2 Dam Protector




1. Coat the new O-rings (1, 2) with ATF WS, and install them to the 1, 2, 3, 4 and reverse clutch.
2. Coat the 1, 2, 3, 4 reverse clutch piston with ATF WS.




3. Install the 1, 2, 3, 4 reverse clutch piston (1) to the transaxle case.




4. Compress the return spring with a press using DT-47693-2 (2).

Note:
* Stop pressing when the spring seat is 1-2 mm (0.039-0.078 in) from the snap ring groove to prevent the spring seat from being deformed.
* Do not expand the snap ring excessively.
* After installing the spring sub-assembly, check that all of the springs are fitted in the piston correctly.
* The snap ring should be securely engaged in the groove of the transaxle case.

5. Using a snap ring expander, install the snap ring (1) to the transmission case.