44. Case Cover Assembly Installation

Case Cover Assembly Installation




1. Install new O-rings to the fluid pressure test hole plugs.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the fluid pressure test hole plugs to the transaxle rear cover and tighten to 7 Nm (62 lb in).




3. Remove any sealant and keep the contact surfaces of the transaxle rear cover and the transaxle case away from oil.
4. Apply sealant Three Bond 1281 (1) or equivalent to the cover.




5. Apply threadlocker to the threads of bolts (3, 4, 7-9).
6. Install the bolts (1-11) and tighten.

* Bolts (3, 4, 7-9) to 19 Nm (14 lb ft).
* Other bolts to 25 Nm (18 lb ft).