Oil Cooler Housing - Leaking
84porsche02Subject
Oil Cooler Housing Changes
Part Identifier 1737
Applies To 944
1984
Group
17
Key Points
^ Torque specification for mounting bolts changed
^ Washers for mounting bolts changed
C
Number
84-01
April 5, 1984
To prevent oil or coolant leakage from the oil cooler housing area, the tightening torque of the 4 mounting bolts was increased as of November 29, 1983; engine numbers 43 E 04711 - 5 speed trans 43 E 20613 - Automatic trans
The torque value for the housing bolts was 20 Nm (14 ft lb) and has increased to 25 N-m (18 ft lb).
In addition, the 4 washers (arrow) have been replaced with a thicker version.
Part Number of the old washers, N 011.525.19 Part Number of the thicker new washers, 900.232.004.02
In case of repair, install the new version washers and torque bolts to 25 N-m (18 ft lb).
CAUTION Part numbers are listed for reference only. Always consult with the Parts Dept. for latest information