Work Procedure

Replacement of bushings in cruise control linkage:

Required tools: 1 screwdriver - large 1 angled needle nose pliers

- Move driver seat all the way back.

- Remove the cruise control cable off of the linkage with screwdriver.

- Remove circlip and washer from linkage shaft with angled needle nose pliers, and remove linkage.

- Remove metal bushings from linkage, hold linkage into vise and push bushings out with a punch.

- Install new plastic bushings, to keep the bushings from falling out, insert with suitable grease.

- Clean shaft and lubricate.

- Reinstall linkage, new plastic washer and circlip. Make sure that circlip sits correctly in groove.

- Reinstall cable for cruise control linkage, check linkage for free movement.