Clutch Spring Adjustment

- A spring which reduces the pedal force is installed to assist the force applied to the pedal. For this purpose, the spring must be preloaded accordingly.
- Measure distance A between outer edge of plate and bearing with clutch engaged (clutch pedal at end stop).
^ Distance A for green color-coded spring (no longer available as spare part) = 60 mm (75 mm).
^ Distance A for blue color-coded spring (increased spring rate/in use since February 1986) = 55 mm (68 mm).
- If necessary, correct by turning the hex nut.

NOTE: Values of distance A in parentheses apply to spring when removed. Reassemble servospring/guide rod with assembly wire (3 mm diameter split pin).