Fuel Delivery and Air Induction

Components

1 - 24:

24 - 45:

Components

1 - 23:

24 - 28:

INSTALLATION NOTES - REMOVING AND INSTALLING MIXTURE CONTROL



1. Torque fillister head screws 1 through 4 crosswise to 10 Nm (1.0 kpm).

2. Tighten other fillister head screws and hex head screws (5 mm longer) with spring and plain washers to block and loosen again 1 turn each.

The 5th screw is a hex head screw due to the lack of adequate space.