M/T - Scraping Noise When Operating Clutch
87porsche06Subject: Scraping Noise
When Operating Clutch
Model
911 Carrera
Group
3
Part Identifier
3041
Number
8707
September 4, 1987
1987 Model (950 Transmission)
Scraping noise when operating the clutch or vibration in the clutch pedal could be caused by the release fork back side making contact with the release bearing.
The back of the release fork is machined from production date: January 21, 1987.
Transmission number: 74 H 048 34
When repairing cars prior to the above transmission number for scraping noise or pedal vibration when operating clutch pedal, check clutch pedal travel before removing the release fork.
Pedal travel up to the stop must be 140 mm to 150 mm.
Pedal travel must be measured horizontally (e.g. with a measuring tape from the driver's seat).
The pedal stop can be adjusted on the floor plate.
If there is no improvement after adjustment, replace release fork.