Seat Back Frames - Repairing
87porsche03Subject: Repairing of Seat Back Frames
Model
All
Group
7
Part Identifier
7219
Number
8701
June 16, 1987
Seat back frame supports may be repaired in the areas utilizing MIG welding.
If the seat back is twisted, straighten before welding. When welding, make two beads 5 mm long or one continuous bead 15 mm long. Keep the size of the bead to a minimum.
Use care when welding to avoid excessive heat build up in seat back frame assembly.
Welding in other areas of the seat back frame or seat bottom frame is not allowed.