Manual Transmission/Transaxle: Tools and Equipment

Tools for Disassembly/Assembly Gearbox Front/Rear Locking Plates





1 Extraction arms for Kukko Puller 20-2 -- 9278
Order # - 000.721.927.80
2 Socket wrench -- 9277
Order # - 000.721.927.70
3 Socket wrench -- 9280
Order # - 000.721.928.00
4 Holding device -- 9275
Order # - 000.721.927.50
5 Centering component -- 9294
Order # - 000.721.929.40
6 Holding device -- 9276
Order # - 000.721.927.60

Tools for Disassembly/Assembly of Intermediate Case





1 Retainer plate -- 9286
Order # - 000.721.928.60
- Retainer plate -- 9286/1 (not illustrated)
Order # - 000.721.928.61
2 Bracket -- 9253
Order # - 000.721.925.30
3 Assembly Bush -- 9283
Order # - 000.721.928.30
4 Puller --9284
Order # - 000.721.928.40

Tools for Removal and Installation of Input Shaft Seal





1 Puller -- 9251
Order # - 000.721.925.10
2 Pressing tool -- 9256
Order # - 000.721.925.60
3 Sleeve -- 9255
Order # - 000.721.925.50

Tool for Disassembly/Assembly of Transfer Case and Intermediate Case





Mandrel

Tools for Disassembly/Assembly of Gear Housing





1 Mandrel -- P254
Order # - 000.721.254.00
2 Pressing Tool -- P254a
Order # - 000.721.254.10
3 Pressing Tool -- P254b
Order # - 000.721.254.20
4 Mandrel -- 9254
Order # - 000.721.925.40

Tools for Disassembly/Assembly of Input Shaft





1 Retainer Plate -- 9177
Order # - 000.721.917.70
2 Socket Wrench -- 9105
Order # - 000.721.910.50

Tools for Disassembly/Assembly of Drive Pinion





1 Bracket -- 9142
Order # - 000.721.914.20
2 Pressing tool -- 9298
Order # - 000.721.929.80
3 Insert -- 9282
Order # - 000.721.928.20
4 Half shells
Order # - 000.721.914.20

Tool for Disassembly/Assembly of Hollow Shaft





Spacer Sleeve -- 9279
Order # - 000.721.927.90

Tools for Removing/Installing Limited Slip Differential





1 Pressing -- 9252
Order # - 000.721.925.20
2 Measuring cylinder -- 9514
Order # - 000.721.951.40

Tools for Disassembling/Assembling Limited Slip Differential





1 pressing tool -- P263
Order # - 000.721.263.00
2 Puller
3 Pressing tool -- P264b
Order # - 000.721.264.20
4 Hook wrench
5 Measuring device -- 9508/1
Order # - 000.721.950.81

Produce Locally Per Dimensions.:

6 Connector -- (produced locally)

Tools to Adjust Ring Gear and Pinion (Drive Set)





1 Measuring mandrel -- VW385/1
2 Centering discs -- 9109
Order # 000.721.910.90
3 Universal gauge -- VW385/30
4 Dial gauge -- standard
5 Dial gauge -- standard (range 0-3 mm)
6 Plunger -- VW385/14
7 Dial gauge extension -- VW385/56
8 Final dimension plate -- 9281
Order # 000.721.928.10
9 Dial gauge bracket -- VW387
10 Clamping sleeve -- 9145
Order # 000.721.914.50
11 Adjusting device -- VW521/4
12 Measuring lever -- VW388
13 Plunger -- VW388
14 Dial gauge extension -- VW382/10
15 Dial gauge extension -- VW385/15
16 Assembly sleeve -- 9283
Order # 000.721.928.30
17 Holding device -- 9253
Order # 000.721.925.30