Instrument Cluster / Carrier: Service and Repair

Backlit instrument cluster, removing and installing

Note:
- On vehicles equipped with air bags, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.

From Model 89 onwards

1. Disconnect battery.

2. Remove steering wheel.

3. Remove cover under the instrument cowling (2 screws).

4. Undo fastening screws (2) for instrument cowling.

5. Remove steenng-column switch.

6. Remove ignition-lock cover. (Procedure is described on page 94 - 4).

7. Disconnect plugs (4) from instrument cluster, turn both locking levers outwards for this.

Note: The plugs are coded and cannot be confused.

8. Lift instrument cowling carefully and tip to the rear.

9. Pull instrument cluster from bracket.

No. 1 - 21: