Evaporator Core: Service and Repair

Evaporator Removal / Installation

Removal

1. Drain air-conditioning system.
2. Drain refrigerant.

3. Remove fresh air blower assembly. Service and Repair

4. Remove center console. Service and Repair

5. Remove instrument panel. Service and Repair






6. Unclip instrument-panel wiring harness.
7. Disconnect plug.
8. Disconnect plug at interior-sensor blower.
9. Pull out air ducts.
1O. Pull out drainage hose.






11. Unscrew A/C lines.
12. Remove vacuum lines.
13. Unscrew refrigerant hoses.
14. Unscrew fastening nuts on the outside (4 pcs.).






15. Unscrew fastening nuts on the inside.
16. Unscrew bracket for instrument panel.
17. Run out heating-A/C unit.

Note: During installation, make sure that water drainage pipe is reinserted.

Disassembly and Assembly of Heater-A/C Unit

To disassemble the Heater-A/C Unit use the component index as a guide.

Exploded View I:

Exploded View II:

Exploded View III:

Component Index