Disassembling/Assembling Cylinder Head

DISASSEMBLING AND ASSEMBLING CYLINDER HEAD (16-VALVE ENGINES)





No. Description Qty. Notes

1 Hydraulic 16 Removing:Withdraw with a magnet, do not mix up
valve tappet Installing: Oil

2 Conical valve 32 Check correct seating
keeper

3 Spring plate 16

4 Valve spring set 16

5 Valve spring 16
support

6 Washer X Note number Redetermine if necessary

7 Valve stem seal 16 Always replace, drive in with press-in tool, Special Tool 9225/1, oil sealing lip, use drift

8 Intake valve 8 Oil valve stem

9 Exhaust valve 8 Oil valve stem

10 Valve guide 16