Clockspring Assembly / Spiral Cable: Service and Repair

1. Remove airbag steering wheel. Service and Repair



2. Loosen and remove trim.
3. Remove right-hand switch panel



4. Take apart plug connectors.
5. Loosen fastening screws.

Note



Prior to installation of the contact unit, place the front wheels in the straight-ahead position and bring the contact unit into the center position (approx. 4 1/2 turns from left or right end stop). The precise center position is indicated by the two arrows.



A new contact unit is locked in the center position. The locking is not removed until after the contact unit has been installed.