Grille: Service and Repair

REMOVING AND INSTALLING FRONT END PANEL

Removing




1. Raise engine hood and run out concealed headlights.
2. Cover bumpers and remove cover strips to avoid damaging the paint finish.













3. Unscrew mounting nuts and remove bolts.




4. Take end panel off of car forward.


Installing




1. Move in end panel from front. Insert mounting screws. Align end panel and fenders to be in same plane. Tighten nuts and screws.




2. Lower engine hood and adjust front panel that gap between panel and hood runs at equal distance. Raise engine hood and tighten screws.