Disassembly/Assembly of Front Cover

Disassembly/Assembly

Cover Assembly:

Legend:

- Refer to images for instructions and legends.

Assembly





1- Short ball sleeve (press in flush)
2- Long ball sleeve (press in to correct position)
3- Oil seal
A- Assembly mark (must point upwards)

- Press in ball sleeves, oil seal and transmission bearing to correct position.





A = Feeler gauge

- Reassemble reverse idler gear with thrust washers and bolt in correct position (refer to exploded view). With thrust washers and bolt located correctly, the axial end play of the reverse idler gear is 0.15 to 0.35 mm.
- Check axial play of reverse idler gear with feeler gauge.