Work Procedure "A"
RECALL P01911 Speedster, Model Year 1994 - Installation of new latches for the folding top.
Note:
Do not raise vehicle on hoist.
1. Open both doors.
2. Unlock the Speedster rear lid with the lever "A" (Figure 1), located on the rear left side.
3. Fold down both sun visors.
4. Take out left side top latch as follows:
To release the top latch, push the red locking button in (Figure 2, Arrow A) and completely open the latch (Figure 2, Arrow X).
Remove the three (3) Phillips screws (Figure 2, Arrow B) and remove the latch.
Important:
The new top latch is marked with a green paint dot on the hook. In the locked position this paint dot is not visible. Do not remove paint dot!
5. Install the new top latch and secure with three (3) Phillips screws. Torque to 2.8 N-m and engage top latch.
6. When fully latched, the white marking line on the red locking button must be visible (Arrow Figure 3).
7. Repeat entire procedure for the right side top latch.
Required tools: Phillips screwdriver
Required parts:
Qty. Part Number Description
2 964 563 081 00 Latch
Time allowance: 20 TU