Tightening Specifications

TIGHTENING SPECIFICATIONS

Component Torque/Ft. Lbs.

Camshaft Cover To Camshaft Housing 7
Camshaft Sprocket Attaching Nut 108
Camshaft Sprocket Attaching Bolt 86
Chain Guides 18
Chain Tensioner Nut 18
Connecting Rod Bolt [02]
Crankcase 25
Crankshaft Pulley [03]
Cylinder Heads To Engine Block [01]
Drive Pulley To Camshaft 66
Dual Mass Flywheel 63
Engine Carrier Bolts 65
Flywheel Except Dual Mass 65
Gear To Balance Shaft 33
Heat Exchanger To Cylinder Head 15 - 17
Knock Sensor To Engine Block 15
Oil Pan Drain Plug 37
Oil Pump To Crankcase 17
Oil Pipe Connections 60 - 75
Rocker Arm Shaft 15
Spark Plugs 15 - 22
Timing Chain Tensioner Nut 18
Vibration Damper Or Pulley 173

[01]-- Except Turbo, torque in two steps: (1) 11 ft lbs., (2) turn bolt 90deg.. Turbo, torque in 2 steps, (1) 7 ft. lbs.;(2) 24 ft. lbs.
[02]-- Torque in three steps: (1) 11 ft lbs., (2) turn bolt 90deg.,(3) turn bolt an additional 90deg..
[03]-- Pulley with single groove, 58 ft. lbs.;pulley with double groove, 122 ft. lbs.