Dashboard / Instrument Panel: Service and Repair

1. Pull out tray and ashtray.
2. Loosen center console cover frame attaching screws.
3. Remove radio assembly.
4. Remove center console attaching screws, then remove.
5. Remove instrument cluster.
6. Remove sun visors, front roof beam trim panel, and A-pillar trim panels.
7. Unclip glove compartment light, then disconnect electrical connector.
8. Remove glove compartment attaching screws, then pull off vent hose and remove glove compartment.
9. Remove instrument panel attaching screws on hinge panel.
10. Remove instrument panel to A-pillar attaching screws, then remove I/P bracket attaching screws.
11. Pull air guides out of nozzles, then remove instrument panel.
12. Reverse to install.