Removing and Installing Wiring Harness

1. Disconnect battery and cover terminal or battery, respectively.
2. Remove fresh-air fan (for access to wiring harness).
3. Remove control Unit and disconnect connectors for control Unit. Service and Repair
4. Disconnect connectors:
- LH front sensor (next to Center. Electrical. System.)
- Contact unit (below dashboard)
- RH front sensor (next to control Unit)
- 2-pin and 6-pin connector (in front of control Unit)

Note
The safety bracket (orange) of the 6-pin connector is destroyed during dismantling. When fitting the assembly, lock the connector with a new safety bracket (blue).

5. Disconnect wiring connection along wiring harness.