Result Memory

Result memory (1 01)
The result memory registers triggering of an alarm, the contact that triggered the alarm as well as the type of activation. A maximum of 10 results may be stored. If another result is stored, the oldest result stored is deleted. The result with the highest number is the most up-to-date result.

Alarms may be triggered by contacts at the following components:
- Doors
- Engine compartment
- Luggage compartment
- Glove compartment
- Radio

Additional alarm triggering options:
- terminal 15 on after system has been activated
- Signal to input 1
- Signal to input 2
- Signal to input 3
- Position switch
- Open circuit of closed loop


NOTE: Up to three alarms may be triggered across input 2.

The following types of activation are to be distinguished:
- normal, i.e. locking the doors with the key, thus activating the central locking system
- locking three times, i.e. locking one of the door locks rapidly for three consecutive times
- System check

The type of activation may be invoked with button 1 on the below display:

Indicated on display
Alarm: - x -
activated by
XXXXXXXXXXXXX


NOTE: Erase the result memory whenever the alarm system has been checked.