General Engine Specifications

Engine/Transmission General Specifications
Internal Engine Designation
Manual Transmission 07
Tiptronic 08
Number Of Cylinders 6
Bore 100 mm (3.94 inch)
Stroke 76.4 mm (3.01 inch)
Displacement (actual) 3600 cc (219.7 cu. inch)
Compression Ratio 11.3 : 1
Max. Engine Power to 80/1269 EEC 200 kW (272 HP)
Net Power, SAE J1349 at Engine Speed 200 kW (270 HP) 6100 rpm
Max. Torque to 80/1269 EEC 330 Nm (33.6 kpm)
Net Torque, SAE J1349 at Engine Speed 330 Nm (243 ft lb) 5000 rpm
Max Specific Power Output:
DIN 70020 55.6 kW (75.6 HP/liter)
SAE J1349 55.6 kW (75.0 HP/liter)
RPM Limiter Fuel Cutoff At 6700 rpm
Idle Speed 800 ± 40 rpm
Fuel Octane Rating 98 RON (88 MON)
Engine Weight (dry, ready for fitting):
Manual Transmission 232 kg (511 lbs.)
Tiptronic 224 kg (494 lbs.)
Engine Oil Consumption up to 1.51/1000 km
Firing Order 1 - 6 - 2 - 4 - 3 - 5



Type
6-cylinder four-stroke internal combustion engine
with 2 horizontally opposed cylinder banks (flat engine)

Crankcase Light-alloy, two piece

Crankshaft Forged, 8-bearing design

Main Bearings Friction bearings

Connecting Rods Forged

Big End Bearings Friction bearings

Pistons Light alloy, pressed

Cylinders Light alloy, individual cylinders

Cylinder Head Light alloy, individual cylinder heads with ceramic exhaust port liners

Valve Guides Press-fitted

Valve Arrangement 1 inlet, 1 exhaust, suspended in V-design

Valve Timing One overhead camshaft each on right and left

Camshaft Cast

Camshaft Drive Double chain

Valve Clearance Hydraulic lash adjustment

Timing for 1mm Valve Lift and Zero Clearance:
Inlet Opens (1° BTDC)
Inlet Closes (60° ABDC)
Exhaust Opens (45° BBDC)
Exhaust Closes (6° ATDC)

Induction System With controlled tuning flap