Right-Hand Drive Vehicles

Only one wiring harness is supplied worldwide for service. The following modifications are therefore required when replacing the wiring harness:

1. Connect jumper adapter 928. 615. 125. 00 to relay base R 34 on the Central Electrical System (not for Japan and USA/Canada vehicles).
The fog light relay is retained on Japan and USA/Canada vehicles.
2. On vehicles without four-wheel drive, the brown wire (0.5 sq mm) must be unlatched from connector II (white) of the Central Information System (pin 24) and insulated.
3. On vehicles without sound package, radio connector II (speaker wires) must be separated from the booster adapter (8-pin connector ahead of radio) and connected to the radio.