Test Point 1

NOTE: After a fault occurs at the alarm system and is remedied, the fault memory must be cleared.


Fault Code 01
Door(s) secured and terminal 15 on.

1. Disconnect plug connection X 11 (driver's side).
2. Check the line from X 11 pin A3 (pin side) to the alarm control unit plug 1, pin 5, for continuity.
3. Check the lines from X 11 pin A3 and pin 26 (sleeve side) for continuity.


NOTE: There is another plug connection in the door on the door lock module.


4. Disconnect plug connection X 12 (passenger's side).
5. Check the line from X 12 pin A3 (pin side) to the alarm control unit plug 1, pin 28, for continuity.
6. Check the lines from X 12 pin A3 and pin 26 (sleeve side) for continuity.