Test Point 14
Fault Code 14Right door secured but not locked.
1. Pull off the Plug I at the alarm control unit.
2. Disconnect the plug connection X 12 (passenger's side).
3. Check the line from the alarm control unit Plug I pin 32 to the door lock module for ground shorts.
- Ohmmeter at alarm control unit Plug I pin 32 and ground
Display: infinity Ohms
4. Check the passenger 5 side door lock module switch contact.
- Ohmmeter at plug connection X 12 pin A5 (sleeve side) and ground.
Door locked.
Display: infinity Ohms
Door not locked.
Display: < 5 Ohms