Test Point 3
Fault Code O3Door tack barrel open actuated for longer than 60 seconds.
NOTE: This fault can also be caused by incorrect operation (door lock actuated towards "Open" for longer than 60 seconds).
1. Pull off plug I at the alarm control unit.
2. Disconnect plug connection X 11 (driver's side).
3. Disconnect plug connection X 12 (passenger's side).
4. Check the tines from the alarm control unit plug I pin 15 to the door lock modules for ground shorts.
- Ohmmeter at alarm control unit plug I pin 15 and ground.
Display: infinity Ohms
5. Check the driver's side door lock module switch contact.
- Ohmmeter at plug connection X 11 pin A6 (sleeve side) and ground.
Door lock not actuated.
Display: infinity Ohms
Door lock actuated towards "Open".
Display: < 5 Ohms
6. Check passenger's side door lock module switch contact.
- Ohmmeter at pug connection X 12 pin A6 (sleeve side) and ground.
Door lock not actuated.
Display: infinity Ohms
Door lock actuated towards "Open".
Display: < 5 Ohms