Test Point 32

Fault Code 32
Passenger compartment monitoring sensor Positive short or faulty.

1. Check power supply for passenger compartment monitoring sensor.
- Disconnect plug connection to the passenger compartment monitoring sensor
- Voltmeter at plug connection, passenger compartment sensor monitoring pin 1 (positive) and pin 4 (negative).
Display: Battery voltage
2. Pull off plug I on the alarm control unit.
3. Voltmeter at plug I alarm control unit pin 24 and ground.
Display: 0 Volt
If the battery voltage is displayed, check the wiring harness for pinches and chafing damage.
4. If no fault is detected, replace the alarm control unit.