Test Point 6
Fault Code 06Door lock barrel open/closed Ground short.
1. Pull off plug 1 at the alarm control unit.
2. Disconnect plug connection X 11 (driver's side).
3. Disconnect plug connection X 12 (passenger's side).
4. Check the lines from the alarm control unit plug 1 pin 35 to the door lock modules for ground shorts.
- Ohmmeter at alarm control unit plug I pin 35 and ground
Display: infinity Ohms
5. Check driver's side door lock module switch contact.
- Ohmmeter at plug connection X 11 pin A4 (sleeve side) and ground.
Door lock not actuated.
Display: infinity Ohms
Door lock actuated towards "Closed".
Display: < 5 Ohm
6. Check passenger's side door lock module switch contact.
- Ohmmeter at plug connection X 12 pin A4 (sleeve side) and ground.
Door lock not actuated.
Display: infinity Ohms
Door lock actuated towards "Closed".
Display: < 5 Ohm
7. Check the lines from the alarm control unit plug I pin 15 to the Door lock modules for ground shorts.
- Ohmmeter on alarm control unit plug I pin 15 and ground.
Display: infinity Ohms
8. Check driver's side door lock module switch contact.
- Ohmmeter at plug connection X 11 pin A6 (sleeve side) and ground.
Door lock not actuated.
Display: infinity Ohms
Door lock actuated towards "Open".
Display: < 5 Ohms
9. Check passenger's side door lock module switch contact.
- Ohmmeter at plug connection X 12 pin A6 (sleeve side) and ground.
Door lock not actuated.
Display: infinity Ohms
Door lock actuated towards "Open".
Display: < 5 Ohms