Circuit Operation

If a command is issued via the radio remote control, this is acknowledged with display type 4 at the alarm readiness display for the duration of the operation.

Commands triggered and correctly executed via the remote control are acknowledged as follows at the output for the direction indicator lights:
- Secure with signal 2
- Lock with signal 3
- Unlock with signal 1

Depending on the country, the checkback signal can be programmed via the Porsche System Tester 2.

All other functions such as interior light control are controlled in the same way as with the vehicle key.

If operating commands are simultaneously present from the radio remote control and the door lock barrels, the signal recognized first has priority.

Vehicles With Alarm System Without Radio Remote Control
For several countries, it is either not possible to obtain radio transmission approval or the radio remote control is not desired by the importer:
- Singapore
- Brunei
- Lebanon
- Saudi Arabia
- Dubai
- Chile
- Korea
- Hungary
- Czech Republic
- Brazil

Vehicles for these countries are equipped with two key grips with lamps instead of with radio key grips.