Alarm Readiness Display
Assignment of the Display Type of the Alarm Readiness Light For the Operating StateIf a control command is issued via the remote control, this is confirmed with display type 4 for the duration of the operation. This display has priority.
Operating conditions Display Type Operating state
during inactive period
Self-test ok, central locking system Rapid flashing (3) Not primed
locked and secured, all inputs in
normal position, not locked 3 x.
Self-test ok, central locking system On Not primed
locked, all inputs in normal position, (5)
not locked 3 x, subsystems switched off.
Self-test not in order Off Not primed
(6)
Self-test in order, central locking Off Not primed
system cannot be locked, not locked 3 x. (6)
Self-test ok, central locking system locked, Off Not primed
active inputs. (6)
Self-test ok, locking/priming by locking 3 x. On Not primed
(5)
Inative period expired Display Type Operating state
All inputs inactive, central locking system Normal Flashing Primed
locked and secured, not locked 3 x, no alarm, (1)
subsystems active.
All inputs inactive, central locking system Normal Flashing Primed
locked, no alarm, not locked 3 x, subsystems (1)
passive.
Inputs active Double Flashing Primed for all non-active inputs
(2)
During or after alarm output. Double Flashing Primed
(2)
Priming/locking command by 3 x rapid locking Double Flashing Primed
of the system. (2)
Self-test not in order Off Not primed
(6)